Either part # 118415 or C56078 will work with all 2008 Hyundai Santa Fe models. They would plug inline with the wiring harness feeding the tail light assemblies on either side of the vehicle.
The Tow Ready has a slightly higher amperage rating, but other than that both wiring harnesses are very similar.
I have provided links to the install details for both harnesses, as well as an install video showing the # 118415 being installed on a 2008 Santa Fe. view full answer...
The Electric Trailer Brake Kit # AKEBRK-2 comes with one left and one right brake assembly and included mounting hardware. The drums are not included. I would need to know what your inner and outer bearing numbers are on your current axle and I will be able to tell you what you need.
The nuts and lock washers # BRKH7 are sold separately. These brakes will work with 10 inch 12 inch and 13 inch wheels, and have an axle rating of 2,000 pounds.
I attached a review video link below. view full answer...
When it comes to installing a trailer hitch on your 2022 Hyundai Santa Fe The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e28AR is confirmed for your vehicle.
The trailer hitch is a bolt-on installation with no welding required, and has a matte black powder coat finish which is over a protective base coat that offers superior rust resistance. The hitch has a maximum gross trailer weight up to 4,000 pounds and has a maximum tongue weight up... view full answer...
I'd recommend going with the etrailer brand # e28AR Class III hitch. When installed on your 2022 Santa Fe, the hitch crossbar will be concealed behind the vehicle bumper, with only the receiver tube and safety chain loops being visible. I'll provide a photo showing what the hitch will look like once it's installed.
If you'll be towing with the hitch, you'll also need a trailer wiring harness like # CU94FR, a ball mount like # 2753 and a trailer ball like # 19260 for a 1-7/8 or # 63845... view full answer...
Switching your ball mount to one with a 5 inch rise, like the Curt # C45336, will help level your trailer but it won't take the sag out of your 2010 Hyundai Santa Fe. The trailer's tongue weight will still be pushing the rear of the vehicle down.
To actually eliminate the sag you may be able to load the trailer with less tongue weight however that could cause additional sway if the trailer's tongue weight is then too low. The best solution is to add a weight distribution system.
If... view full answer...
I would be happy to help you find a trailer hitch and wiring harness for your 2022 Hyundai Santa Fe. Lets start with the trailer hitch, I recommend the Curt Trailer Hitch Receiver item # C34ER. This is a custom fit hitch with a 2" receiver that has been designed specifically for your vehicle. It requires no welding or drilling and comes with all necessary hardware to install. It is a class III hitch receiver with a maximum gross trailer weight of 4,000 lbs and a maximum tongue weight of... view full answer...
We have exactly what you're looking for with the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package # CU94FR. This plugs into the OEM connector on your 2020 Hyundai Santa Fe and gives you a 4-Way flat connector that then supplies your trailer with the different light functions. I have attached a video of us installing this on a 2019 Santa Fe that you can reference for the install.
If you don't already have a trailer hitch then I recommend using the etrailer.com Trailer Hitch... view full answer...
Since there aren't any 7-Way trailer connectors that will plug into the 2015 Hyundai Santa Fe you will need to hardwire one in. Half the work is already done since you have a 4-Way installed already. All you will need is kit # ETBC7 to add a 7-Way and retain the 4-Way. I have included some links that show and explain the ETBC7 installation for you. view full answer...
If you have the same Rhino-Rack roof rack parts # RRVA137B-2, # RRRLKVA, and # DK360 like we installed on a similar 2017 Hyundai Santa Fe then that would mean your 2500 Series Legs have about 40-1/2" of space between them.
With this being the case you can either use the Rhino-Rack 38" Long Fairing # RRRF2 or the Inno 40" Long Fairing # INA261. view full answer...
If you can confirm with your dealership that your 2018 Hyundai Santa Fe Sport 2.0 Turbo AWD DOES have the factory tow package then you will use Curt T-Connector 4-pole harness kit # C56332.
But if you don't have it, or if you just don't even want to bother to find out, you can still always use the kit for the version without the tow package since it will still fit and work fine.
Tekonsha 4-pole Kit # 118571 will work on either version but its installation will be a little more involved... view full answer...
We have the perfect Roof Rack For your 2021 Hyundai Santa Fe with moonroof!
The Rhino-Rack Vortex Aero Crossbars # RRVA126B-2
RCL Legs # RRRCL4
Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs # RR66QJ
This kit per as customer stated that the top of the crossbar is about 4 inches above the roof glass and does not interfere with opening the moonroof, but Rhino Rack does not recommend it.
The cross bars have a slim elliptical shape that helps to create an extremely... view full answer...
In order to install an electrical hookup with a brake controller kit on your 2009 Hyundai Sante Fe, you will need the following parts:
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56346 (if your vehicle has the factory tow package) or # C56078 (if your does not have the factory tow package).
- Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7
- Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles # 90885... view full answer...
According to the 2002 Hyundai Santa Fe owner's manual, the towing capacity of the vehicle can vary from 1200 to 2700 lbs depending on how the vehicle is equipped and if the trailer has brakes. Check your owner's manual for specifics.
The Curt # C13505 would work well for towing a rental trailer. In addition to the hitch, you'd need a trailer wiring harness, a ball mount and the correct trailer ball. The trailer rental place should be able to tell you what ball size you need.
I'd recommend:
Tow... view full answer...
The hitches we offer, the Curt # C34ER and the etrailer brand # e28AR are identical except for their finish. The Curt has a glossy finish, the etrailer has a matte finish. I prefer the etrailer brand for a couple of reasons: Both hitches will fit the Calligraphy trim.
• The etrailer brand is usually less expensive by a few dollars
• The matte finish tends to disappear a little better under the vehicle, which makes the hitch a bit less visible.
If you plan on towing a trailer you will... view full answer...
For a 7-way on your 2015 Hyundai Santa Fe you can use the Tekonsha # TK24FR. This will plug into the 2 factory ports you're describing for installation. It also comes with a wiring adapter to fit Tekonsha brake controllers. However, I recommend the Tow-Pro Liberty Brake Controller # RED24FR from Redarc.
The main unit of this brake controller mounts out of sight so only the control knob is visible. This keeps it out of the way in the cab of your vehicle and also provides a sleek OEM look.... view full answer...
We have a kit just for this. The 7-Way Upgrade Kit w/ Junction Box and RV Style Connector part # HS381-9000 gives you all of the required components to upgrade from your existing 4-way to a 7-way plug. The only exception is the correct length of 12 Gauge Duplex Wire part # 12-1-1. You will order enough to go from where you will mount the junction box back to the axle then across to the other side.
Check out the video my buddy Ellen did. As you can see this provides excellent connection... view full answer...
If you are wanting to go with the Tekonsha PowerTrac Brake Controller # 39523, another thing that you will likely need for your 2009 Hyundai Santa Fe is the Tekonsha Pigtail wiring harness # 7894. Also, if you don't have all of the wiring ran from your brake controller to your 7-way you can use the Wiring Kit # 5506.
We also have Dielectric Grease for Electrical Connectors # 11755.
I have also attached a installation video for you. view full answer...
To convert the 4 pole plug # 118415 on your 2009 Hyundai Santa Fe to a 6 pole that will connect to your trailer, you can use the Hopkins Adapter # 37175 if your trailer uses a round connector, which can simply be plugged into your existing 4-pole connector.
If your trailer has a 6-way square connector, you will instead need to use the Hopkins 6-Pole Square Kit # 37995. For this you will actually need to hardwire the harness into your vehicle's 4-pole wires. The kit comes with both connection... view full answer...
We can help you with wiring for your 2010 Hyundai Santa Fe Sport so you can tow your camper that has a 7-way wiring set-up.
If the car has no wiring at all you will need to start with a 4-pole harness # 118415 that is a simple plug-in installation at your Santa Fe's tail lights. You'll then add the 7-way installation kit # ETBC7 which provides both the 7-way connector you need and the other parts to install a brake controller.
Campers with a 7-way type wiring set-up usually have electric... view full answer...
I recommend the Vehicle Wiring Harness # CU94FR for your 2023 Hyundai Santa Fe. I like this harness over the others we offer because it has a more reliable powered converter box and you will get a longer run time and more usage out of it than the other harnesses. This connector plugs into your vehicle's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area. Once the installation is complete, the 4-way flat connector will be stowed beneath... view full answer...
Go To Results